Filter
Top Products
7-7
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Chapter
Status Menu
Rx Unicast Total number of unicast packets received by the phone
Neighbor Device ID:
• Neighbor IP Address
• Neighbor Port
Identifier of a device connected to this port discovered by CDP
protocol.
Restart Cause—One of these values:
• Hardware Reset (Power-on reset)
• Software Reset (memory
controller also reset)
• Software Reset (memory
controller not reset)
• Watchdog Reset
• Unknown
Cause of the last reset of the phone
Port 1 Link state and connection of the PC port (for example,
Auto
100 Mb Full-Duplex
means that the PC port is in a link-up
state and has auto-negotiated a full-duplex, 100-Mbps
connection)
Port 2 Link state and connection of the Network port
IPv4 Information on the DHCP status. This includes the following
states:
CDP BOUND
CDP INIT
DHCP BOUND
DHCP DISABLED
DHCP INIT
DHCP INVALID
DHCP REBINDING
DHCP REBOOT
DHCP RENEWING
DHCP REQUESTING
DHCP RESYNC
DHCP UNRECOGNIZED
DHCP WAITING COLDBOOT TIMEOUT
SET DHCP COLDBOOT
SET DHCP DISABLED
DISABLED DUPLICATE IP
SET DHCP FAST
Table 7-3 Network Statistics Message Information for the Cisco Unified IP Phone 8941 and 8945
Item Description