Filter
Top Products
4-7
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Chapter
IPv4 Setup Menu Options
Related Topics
• Displaying a Configuration Menu, page 4-2
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-3
Alternate TFTP Indicates whether the phone is using an alternative TFTP
server.
Scroll to the Alternate TFTP option
and press the Yes softkey if the
phone should use an alternative
TFTP server; press the No softkey if
the phone should not use an
alternative TFTP server.
TFTP Server 1 Primary Trivial File Transfer Protocol (TFTP) server used
by the phone. If you are not using DHCP in your network
and you want to change this server, you must use the TFTP
Server 1 option.
If you set the Alternate TFTP option to yes, you must enter
a non-zero value for the TFTP Server 1 option.
1. If DHCP is enabled, set the
Alternate TFTP option to Yes.
2. Scroll to the TFTP Server 1
option, press the Edit softkey,
and then enter a new TFTP
server IP address.
3. Press the Apply softkey, then
press Save.
TFTP Server 2 Optional backup TFTP server that the phone uses if the
primary TFTP server is unavailable.
1. Enter an IP address for the TFTP
Server 1 option.
2. Scroll to the TFTP Server 2
option, press the Edit softkey,
and then enter a new backup
TFTP server IP address.
3. Press the Apply softkey, then
press Save.
DHCP Address
Released
Releases the IP address assigned by DHCP. Scroll to the DHCP Address
Released option and press the Edit
softkey, then press the Yes softkey to
release the DHCP Address.
Table 4-2 IPv4 Setup Menu Options (continued)
Option Description To Change