Filter
Top Products
3-12
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Chapter
Configuring Security on the Cisco Unified IP Phone
Procedure
Step 1 Obtain the CAPF authentication code that was set when the CAPF was configured.
Step 2 From the phone, choose Applications > Administrator Settings > Security Setup.
Note You can control access to the Administrator Settings Menu by using the Settings Access field in
the Cisco
Unified Communications Manager Administration Phone Configuration window. For
more information, see the Cisco Unified Communications Manager Administration Guide.
Step 3 To unlock settings, see the “Unlocking and Locking Options” section on page 4-3.
Step 4 Scroll to LSC and press the Update softkey.
The phone prompts for an authentication string.
Step 5 Enter the authentication code and press the Submit softkey.
The phone begins to install, update, or remove the LSC, depending on how the CAPF was configured.
During the procedure, a series of messages appears in the LSC option field in the Security Configuration
menu, so you can monitor progress.
You can verify that an LSC is installed on the phone by choosing Administrator Settings > Security
Setup and ensuring that the LSC setting shows Installed.
Related Topic
Understanding Security Features for Cisco Unified IP Phones, page 1-9