Filter
Top Products
Contents
iv
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
OL-20851-01
Power Outage 2-4
Obtaining Additional Information about Power 2-5
Understanding Phone Configuration Files 2-5
Understanding the Phone Startup Process 2-6
Adding Phones to the Cisco Unified CM Database 2-8
Adding Phones with Auto-Registration 2-8
Adding Phones with Auto-Registration and TAPS 2-9
Adding Phones with Cisco Unified CM Administration 2-10
Adding Phones with BAT 2-10
Determining the MAC Address for a Cisco Unified IP Phone 2-11
CHAPTER
3 Setting Up the Cisco Unified IP Phone 3-1
Before You Begin 3-1
Network Requirements 3-1
Cisco Unified Communications Manager Configuration 3-2
Understanding the Cisco Unified IP Phones 8941 and 8945 Components 3-2
Network and Access Ports 3-2
Handset 3-3
Speakerphone 3-3
Headset 3-3
Installing the Cisco Unified IP Phone 3-5
Reducing Power Consumption on the Phone 3-7
Footstand 3-7
Higher Viewing Angle 3-9
Lower Viewing Angle 3-10
Verifying the Phone Startup Process 3-10
Configuring Startup Network Settings 3-11
Configuring Security on the Cisco Unified IP Phone 3-11
CHAPTER
4 Configuring Settings on the Cisco Unified IP Phone 4-1
Configuration Menus on the Cisco Unified IP Phone 4-1
Displaying a Configuration Menu 4-2
Unlocking and Locking Options 4-3
Editing Values 4-3
Network Setup Menu 4-4
IPv4 Setup Menu Options 4-6
Security Configuration Menu 4-8
Trust List Menu 4-8