Filter
Top Products
Documentation Updates
96
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
Running Show Tech
To run show tech correctly, use this example to construct your command:
show -f output.txt -v -w480 db
The example given in the Show Command chapter of Configuring Remote
Serviceability for Cisco CallManager 3.0 (page 3-2) lacks a space before “db.”
Changes
This section contains changes that have occurred since the original release of the
Cisco CallManager Administration Guide Release 3.0. These changes do not
currently appear in the Release 3.0 Cisco CallManager Administration Guide or
the online help for the Cisco CallManager application.
Default Value Changed for
SdlTraceTotalNumFiles
Service Parameter
SdlTraceTotalNumFiles is a service parameter for the Cisco CallManager service
type. The default has been changed to 250. This is the correct default for this
service parameter.
Omissions
This section contains lists of service parameters for the Cisco CallManager that
were not included in the initial production of the Release 3.0 Cisco CallManager
Administration Guide and online help for the Cisco CallManager application. A
later release of the document will define these parameters.
Caution Do not modify any of the defaults or settings of the following
parameters without the assistance of the Cisco Technical Assistance
Center (TAC).