Filter
Top Products
Documentation Updates
88
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
NumberingPlanInf
o
Default: 1 Gives some control over the ISDN
Numbering Plan Information field on the
Called Party Number. This control that is
available for H.323 calls and ISDN calls
has the following characteristics:
• If set to 0: disabled
• If set to 1: a check determines what
the ISDN Type of Number on the
called party information element is.
If the Type of Number is set to
UNKNOWN, the Numbering Plan
Information is also set to
UNKNOWN.
• If set to 2: The Numbering Plan
Information is set to a PRIVATE
PLAN, and the Type of Number is set
to UNKNOWN.
ReorderRouteList Default: F Specifies when set to true that devices
that have the same selection order in a
route group, and are associated with a
route list, are re-ordered when a call is
placed using the associated route list.
StopRoutingOnOu
tOfBandwidthFlag
Default: F Specifies when set to true, that if a call
being routed through a route list detects
the associated “cause” during the release
of the call, no re-routing to the next
device in the route list is attempted and
the call is released with the associated
cause.
Table 9 Cisco CallManager Service Parameter Updates
ParamName Values Description