Filter
Top Products
Resolved Caveats
44
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
CSCdt19887 MTP resources reporting status=1, but
Cisco CallManager will not jump to
better resources.
The Cisco CallManager software has been
modified to handle error code 255 from the
Cisco Catalyst 6000 - DSP Resource device
when there is error in opening the receive
channel due to out of resource (transcoder);
either the DSP is dead, or no more DSP is
available in the device. The
Cisco CallManager marks the device
unavailable, so that the next call uses the
next transcoder device. The Cisco Catalyst
6000 - DSP Resource device will wait until
all the active calls existing in the device
become idle; then, it resets itself and
reregisters with the Cisco CallManager.
CSCdt20674 Manual DA restart causes
Cisco CallManager restart.
The Cisco Access Digital Trunk Gateway
DT - 24+ control process was stopping
before a related thread that reads the udp
messages coming in from the gateway had
stopped. This udp read thread was then
trying to access Cisco Access Digital Trunk
Gateway DT - 24+ data members that no
longer existed in memory, thus causing a
crash of Cisco CallManager.
Table 4 Cisco CallManager Release 3.0(8) Resolved Caveats (continued)
DDTS Number Summary Explanation