Filter
Top Products
Obtaining Documentation
100
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
Errors
This section contains any errors contained in the Cisco CallManager
Administration Guide for Release 3.0 and/or the online help for the
Cisco CallManager application. The upcoming release of the document and
online help application will correct these errors.
Incorrect Name of
MwiSearchSpace
Service Parameter
The name of the Cisco Messaging Interface (CMI) service parameter appears
incorrectly in the documentation and online help application. The parameter name
should be MwiSearchSpace. The documentation is also missing a description of
the value to be entered. The value to enter for MwiSearchSpace is a
colon-separated list of partition names. For example, dallas01:dallas02:dallas03,
where dallas01, dallas02, and dallas03 are names of partitions.
Incorrect Definition for HoldType and ToneOnHoldTime
The definitions for the Cisco CallManager HoldType and ToneOnHoldTime
service parameters are incorrect in the Cisco CallManager Administration Guide
and online help for Cisco CallManager Release 3.0. The correct definitions are as
follows:
• HoldType — Determines whether the hold light flashes more rapidly for the
user who placed a call on hold in the case where two different phones share
the same directory number. The default value is still F.
• ToneOnHoldTime — Determines the time interval between tones when a call
is on hold. The default is 10 seconds, and the value range is 3 to 99999.
Obtaining Documentation
The following sections provide sources for obtaining documentation from Cisco
Systems.