Filter
Top Products
New and Changed Information
16
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
through the Cisco AVVID network, out of TDM networks to another
AMIS-equivalent voice messaging system. The capabilities allowed include the
ability to reply to and forward messages from one messaging system to another.
User Interface Enhancements
Cisco CallManager Release 3.0(5a) makes the following enhancements to the
Cisco CallManager Administration configuration pages:
• Cisco IP Phone Services Configuration—This new page enables
administrators to add, modify, or delete Cisco IP Phone services to which
users can subscribe to at their site. To access this page from the main
Cisco CallManager Administration page, select Feature > Cisco IP Phone
Services.
• Cisco uOne Port Wizard—The Cisco uOne Port Wizard enables
administrators to quickly configure ports associated with a Cisco uOne
messaging server to the Cisco CallManager database. To access the wizard
from the main Cisco CallManager Administration page, select Device >
Cisco uOne Port; then, click the Cisco uOne Port Wizard link.
• CTI Route Point Configuration—This new page enables administrators to
add, modify, and delete CTI route points. A CTI route point is a virtual device
that can receive multiple, simultaneous calls for the purpose of
application-controlled redirection. Applications that use CTI route points
include the Cisco IP Interactive Voice Response System. To access this page
from the main Cisco CallManager Administration page, select Device > CTI
Route Point.
• CTI Port Configuration—This new page enables administrators to add,
modify, and delete a CTI port configuration. CTI ports are virtual devices that
are used by software-based Cisco CallManager applications such as Cisco
SoftPhone, Cisco AutoAttendant, and Cisco IP Interactive Voice Response
(IVR). To access this page from the main Cisco CallManager Administration
page, select Device > Phones; then, select CTI Ports.
• Gatekeeper Configuration—You can now access gatekeeper configuration as
a separate configuration page where administrators can configure one
gatekeeper, or Cisco MCM, per Cisco CallManager cluster. A gatekeeper
device supports the H.225 RAS message set used for call admission control,
bandwidth allocation, and dial pattern resolution. To access this page from
the main Cisco CallManager Administration page, select Device >
Gatekeeper.