Filter
Top Products
Resolved Caveats
54
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
CSCds63460 BLIND TRANSFER: caller/calledid
information becomes messed up on
blind transfer.
Cisco CallManager software has been
modified to correctly display the calling,
called party number, and name for the
scenario of a call that was blind transferred
to a line, which already had an active call
(call-waiting scenario). After the change,
the calling, called party number, and name
correctly display for both the active call and
incoming call.
CSCds63489 Call waiting call is not idled on Call
Forward No Answer.
A fix was made to CTI to allow the 3rd and
subsequent calls to roll to voice mail or be
answered instead of disconnecting or going
to fast busy.
CSCds65046 Server logs out Cisco WebAttendant
client when the client is idle for 2
minutes.
A race condition was causing TCD to
corrupt its keepalive tracking registers for
some logged-on clients. This would cause
TCD to erroneously determine that the
client was dead, closing the TCP
connection to the client. Changes were
made to prevent this multi threaded race
condition from affecting the keep alive
logic.
CSCds66353 Cisco CallManager tells MGCP
gateway to use VAD when
SilenceSuppression is set to False.
The Cisco CallManager software’s code
was modified to support
SilenceSuppression accordingly.
Table 6 Cisco CallManager Release 3.0(6) Resolved Caveats (continued)
DDTS Number Summary Explanation