Filter
Top Products
89
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
Documentation Updates
StopRoutingOnUn
allocatedNumberF
lag
Default: F Specifies when set to true, that if a call
being routed through a route list detects
the associated “cause” during the release
of the call, no re-routing to the next
device in the route list is attempted and
the call is released with the associated
cause.
StopRoutingOnUs
erBusyFlag
Default: F Specifies when set to true, that if a call
being routed through a route list detects
the associated “cause” during the release
of the call, no re-routing to the next
device in the route list is attempted and
the call is released with the associated
cause.
TosBitPosition Default: 3 Allows setting a bit between bit 0 and bit
4 along with IPTOS settings to make it
compatible with Cisco DIFF-SERV
(Differentiated Service).
VoiceMailMaximu
mHopCount
Default: 12 Used together with
AdvancedCallForwardHopFlag, allows
the Cisco CallManager to select the next
available voicemail port by skipping the
busy or unregistered voicemail ports.
Note Set
VoiceMailMaximu
mHopCount to the
number of
voice-mail ports in
the system.
Table 9 Cisco CallManager Service Parameter Updates
ParamName Values Description