Filter
Top Products
Resolved Caveats
34
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
CSCds74363 User can delete route list even if it is in
use.
The code now checks DeviceNumPlanMap
table to see whether the route list is associ-
ated with any route pattern.
CSCds74374 An error occurs while deleting an active
route filter.
A code change interprets the error and gives
it a clearer message.
CSCds77080 Blind transfer using the Cisco IP
Softphone fails through a Catalyst 6000
and a Catalyst 4000 gateway.
A Cisco CallManager code change corrects
this behavior.
CSCds77431 No ringback occurs with de30+ when PI
is not present.
A code change adds an option to configure
outbound setup for PRI devices to include
progress indicator. There is now a check
box on the PRI configuration screen to
include PI in setup.
CSCds87815 AVVID: Call group pickup no longer
works.
The types of Call Pickup and methods for
handling both Call Pickup and Group Call
Pickup are adequately described in "Getting
Started with the Cisco IP Phone
7960/7940."
CSCdt02533 Memory leaks occur in dllhost when
CDRs are decreased.
Deleting CDR records in a specific way
caused this behavior. A Cisco CallManager
code change corrects this behavior.
CSCdt06744 Call forwarded via IVR does not show
forward information.
A Cisco CallManager code change added a
service parameter to correct this behavior.
Table 3 Cisco CallManager Release 3.0(9) Resolved Caveats (continued)
DDTS Number Summary Explanation