Filter
Top Products
93
Release Notes for Cisco CallManager Release 3.0(10)
78-13493-02
Documentation Updates
Parity Cisco CMI connects to the voice mail system via an EIA/TIA-232
connection. This parameter defines that connection.
Recommended default value: Even
Note The parity settings can be None,
Even, Odd, Mark, or Space.
Settings are usually Even and
None, with Mark and Space
rarely being used. Just using the
first character of the parity name
also works.
RouteFilter CMI requires this parameter is one of four required to register an
intercept for the voice mail system with which CMI is going to work.
Note Small systems without a
complex dialing plan usually
only need the VoiceMailDn
parameter. The remaining
parameters, DialingPlan,
RouteFilter, and
VoiceMailPartition, will default
to empty strings.
SerialPort Cisco CMI connects to the voice mail system via an EIA/TIA-232
connection. This parameter defines that connection.
Recommended default value: COM1
Note The SerialPort name should be
the same name that you see in
Device Manager under NT.
Table 11 CMI Service Parameters Not Included in Release 3.0 Documentation (continued)
ParamName Description