Filter
Top Products
51
Before you wall-mount your Synergy 1500, check
that:
• the wall can support the weight of the base
unit and handset;
• the position you choose leaves sufficient space
so that the base unit (which is larger than the
bracket) is clear of any obstruction on the wall,
such as a shelf or cupboard. Leave enough
space so that the handset can be placed on
charge without touching any obstructions.
•
Attach the base station to the bracket as
shown.
7t Edition ~ 8t October ’98
Wall- mounting
PRESS AND
SQUEEZE
INWARD
SLOT INTO POSITION
2
SLIDE BASE
STATION INTO
RETAINER
SLOTS ‘A & B’
3
2
3
1
1
To wall-mount the Synergy 1500 base station
• Make sure the mains power is disconnected.
• Using the wall-mounting bracket as your
template, drill two holes for the two screws.
• Insert the wall plugs (if you need them) into
the holes and screw the bracket to the wall.
When wall-mounted,
care should be taken
when replacing the
handset into the cradle.
Always place the base
of the handset into the
cradle first and then
push back into position.
WALL
View from underneath
A
B