Filter
Top Products
Memos
Leaving memos
Use the MEMO facility to leave messages for
members of your household or office
colleagues. Memos can be recorded from both
handset and base station.
To record a memo from the handset
• Press ➔ button once. Display shows ANS
PHONE.
• Press ✔ button. Display shows
ANS ON OFF or
PLAY , if there are messages. If ANS ON OFF
press ➔ button until MEMO appears.
• Press ✔ button. Display shows
PLS LISTEN, after
2 seconds the voice says ‘Please speak after
the tone. To end recording press End’ (i.e. ✔).
• Display shows and
END.
• A tone sounds to signal the start of recording.
• Leave your message, pressing ✔ button at the
end. A tone sounds and
END disappears from
the display.
•
MEMO reappears. The message is tagged with
day and time.
• Handset display shows the message symbol.
• Both handset and base station displays show
the new message total.
22
To record a memo from the base station
• Press and hold down the MEMO button.
• After less than a second you will hear ‘Hold
the key to record the message. Please speak
after the tone.’
• A tone sounds, the base station display shows
and recording begins.
• Record your memo
• Release the
MEMO button when you have
finished. A tone sounds at the end of
recording.
• Both base station and handset displays show
the new message total.
• Handset display shows the message symbol
7t Edition ~ 8t October ’98