Filter
Top Products
29
To operate your Synergy 1500 answering
machine from a Touchtone™ phone
Access to your Synergy is via the Touchtone™
keypad, using the security access code
described above. Whenever you access the
system remotely the base station will display ‘
A’.
• Call your Synergy number. It answers your call
and plays the outgoing message you last set.
• Press ✱ at any point during the outgoing
message.
• Voice says ‘Please enter your security code.’
Enter the code using the keypad.
• If insufficient digits are entered within 8
seconds you will hear ‘Please enter your
security code.’
• If you enter the wrong code you will hear
‘Error. Thank you for calling’. The call will be
ended.
• If you have entered the code correctly you
will have access to the Synergy 1500 remote
operations menu. The voice announcements
at this point vary, depending on whether or
not there are messages stored.
If there are no messages:
• Voice says ‘You have no messages. For Menu
press 1.’
• Press 1. You will hear a range of numbered
options.
• If you know the number of the option you
require you can enter it immediately instead
of pressing
1 for MENU.
• If you press nothing you will hear ‘Thank you
for calling’ after 8 seconds and the call is
ended.
If there are stored messages but no new
ones:
• Voice says‘For MENU press 1. To play all
messages press 2.’
If there are new messages:
• Voice says‘For MENU press 1. To play all
messages press 2. To play new messages press
3.’
• Press
2 or 3.
• In both cases. Voice says ‘You have X
messages. Message 1’ and the messages will
be played in the usual way.
• After all messages have been played voice
says ‘End of messages. To delete all messages
press 5’. A tone sounds.
Either:
• Press 5. You will hear ‘All messages deleted’, a
pause, then ‘Thank you for calling’.
Or:
• Do nothing. There will be a pause, then
‘Thank you for calling’.
7t Edition ~ 8t October ’98
1
1
2
A
B
C
1
2
A
B
C
3
D
E
F
5
J
K
L