Filter
Top Products
6
Setting up follow these steps to get your Synergy 1500
ready for use.
1. Connect the telephone line cord
If you do not have modern phone sockets, call
Freefone 0800 800 150 and ask for a BT
engineer to come and fit the correct type. This
is a chargeable service.
2. Connect the telephone line cord to
the Synergy 1500 base station
Plug the line cord into the line socket on the
underside of your Synergy 1500.
3. Connect the power cable
Plug the power cable into the power socket on
the underside of your Synergy 1500. When the
power is switched on, the base station
CHARGING light comes on and the answering
machine will announce the day and time setting.
Plan where you will put your Synergy 1500 base
station. It should be within 2 metres of
a power socket and phone socket otherwise extension
cables will be required. You can mount your Synergy
1500 on the wall or leave it free standing. To wall-
mount your Synergy 1500, see page 51.
Please note
Take care that the telephone line cord and power
cable plugs are connected to the correct sockets.
Incorrect placement could damage the unit.
7t Edition ~ 8t October ’98