Filter
Top Products
• The handset message symbol is
displayed for the first time, if this is the first
message to be recorded.
• The message symbol will already be on the
display if earlier unplayed messages are still
stored.
• Message Alert, if switched on, will sound on
the base station.
Call Screening
When the answering machine is switched on,
you can hear incoming calls and decide whether
to answer them or let your Synergy 1500 take
the message. If you decide to answer the call,
the answering machine will stop when you pick
up any handset from the base or charging
station (or press the
TALK button) and allow
you to speak direct to the caller.
If you want to carry on screening the call you
must press the ✔ button before either lifting the
handset from the base station or pressing the
TALK button (if the handset is away from the
base station). Once you have pressed the ✔
button the display shows
SCREENING.
21
To receive calls in Answer and Record mode
You can set your Synergy 1500 answering
machine to answer and record incoming calls
(
ANS AND REC) - unless the message store is full
up (see page 20).
When a call comes in:
• Both your Synergy 1500 handset and base
station will ring (unless switched off).
• The Talk symbol flashes on the handset
display and the calls light comes on.
• Base station
In-Use light also flashes.
•
SCREEN appears on the handset display.
• The machine answers the call after the pre-set
number of rings, at which point the
In-Use
light glows steadily on the base station, the
ringing stops and the Talk symbol
continues to flash.
• The outgoing message is played followed by a
recording tone to signal that recording can
begin.
• Both outgoing and incoming messages are
audible through the base station speaker at
the pre-set volume.
• Base station display remains unchanged,
showing the current number of stored
messages.
• When the call ends, and the line clears, the
recording stops.
• The end of recording tone sounds at the base
station
• Handset and base station displays change to
show the new total of stored messages.
• The
In-Use light stops flashing
• The Talk symbol disappears.
• The incoming message is tagged with the
dayand time it was received.
Please note
The screen functions will also work when the
answer machine is off.
7t Edition ~ 8t October ’98