Filter
Top Products
19
To set Message Alert
• Press ➔ button once. Display shows
ANS PHONE.
• Press the ✔ button. Display shows ANS ON OFF
or PLAY, if there are messages.
• Press ➔ button several times until
ANS SET-UP
is displayed.
• Press ✔ button. Display shows
REC OGM.
• Press ➔ button several times until MESSGE ALERT
is displayed.
• Press ✔ button. Display shows current
setting,
ON or OFF.
• Press ➔ button to toggle between them.
• Press ✔ button when your preferred option is
shown.
•
MESSGE ALERT is displayed briefly and a
confirming tone is sounded. In a few moments
the the display reverts to
HSET X.
To switch Message Alert on and off
• Press ➔ button. Display shows ANS PHONE.
• Press ✔ button. Display shows PLAY or
ANS ON OFF.
• Press ➔ button several times until display
shows
ANS SET-UP.
• Press ✔ button. Display shows
REC OGM.
• Press ➔ button to scroll through the options
until
MESSGE ALERT appears.
• Press ✔ button. Display shows
ON or OFF.
• Press ➔ button to toggle between the two.
When preferred option is displayed press
✔ button.
• Message Alert is now set.
To turn your answering machine on & off
Your Synergy 1500 answering machine can be
turned on and off via the handset or base
station. Any messages present when the
machine is switched off are automatically saved.
If set to
OFF the answering machine will not
answer an incoming call until after 20 rings.
This feature is designed to allow plenty of time
for calls to be answered and to provide a back-
up if you have inadvertently left the machine set
to
OFF or, for any reason, cannot take the call.
On/off via base station
The base station display will show the current
status of your Synergy 1500 answering machine.
‘
--’ indicates that it is off, ‘0’ that it is on.
• Press the
ANSWER ON/OFF button. The
voice says ‘Answer off’.
• Display shows ‘
--’.
• Pressing the button again will turn the
machine back on. Voice says ‘Answer on’.
Display shows ‘
0’.
The display on your handset will also change to
indicate the settings at the base station.
• If set to
ON, the handset will show HSET 1 01
(the last two digits indicate the number of
messages stored).
• If set to
OFF the handset display will show
HSET 1 only.
7t Edition ~ 8t October ’98