Filter
Top Products
10
To page the handset
• Press and release the blue PAGE button on
the base station.
The handset rings for about 10-12 seconds.
Display shows PAGE and the flashes.
Paging is useful to help you find a misplaced
handset. You cannot hold a conversation between
the handset and the base station.
If you hit the page button by accident or want to
cancel it, press and release the button quickly.
If you have more than one handset registered to
the base station, all the handsets will ring.
To redial the last number
• Press the TALK button.
• Press the
REDIAL button. The number is
dialled. Display shows the number.
Or
• Press the
REDIAL button. Display shows the
last number called. The number can be edited
by pressing the
✗ button to delete individual
digits.
• Press the
TALK button. The number is dialled.
To adjust the earpiece volume
You can adjust the volume at any time during a
call or whenever you get an external line and
hear the dial tone.
• Press the
VOLUME buttons + or – on the side
of the handset to increase or decrease the
volume. Display shows the level by a series of
vertical bars. I = min. IIIII= max.
7t Edition ~ 8t October ’98
Redial
Please note
If the volume – button is pressed whilst the handset
is in standby mode the handset volume is set to
SILENT. To deselect this option press the – button
again. For more information see ‘Optional Settings’,
page 32.