Filter
Top Products
32
To switch off the handset ringer
When the handset is in standby or placed on the
base station, you can turn off the handset ringer.
• Press and hold the
VOLUME DOWN button on
the side of the handset until the display shows
the word SILENT.
• To turn the ringer back on, press and hold
the
VOLUME DOWN button until SILENT
disappears.
To adjust the dial delay
The dial delay is the time taken by the phone to
send a number to the exchange after dialling.
The dial delay can be set to short, medium or
long. The factory setting is medium.
• Press the ➔ button until display shows SET UP.
• Press the ✔ button. Display shows HANDSET.
• Press the ➔ button. Display shows BASE.
• Press the ✔ button. Display shows
SECURITY PIN.
• Press the ➔ button until the display shows
DIAL DELAY.
• Press the ✔ button. Display shows current
setting (SHORT, MED, or LONG).
• Press the ➔ button to change the setting.
• Press the ✔ button. A beep confirms that the
change has been made.
7t Edition ~ 8t October ’98
Optional settings
If you stop any procedure before it is completed, your
Synergy handset will revert to standby after 20
seconds.