Filter
Top Products
87
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Wall mounting template
Wall mounting
Important
Before you wall-mount your BT Aqua, check
that you are not drilling into any hidden
wiring.
Before you drill, make sure the power and
telephone line cables will reach the sockets.
1. Use the template to mark the drilling
locations and drill two holes in the wall 6cm
apart horizontally using an 8mm drill bit.
2. Insert the wall plugs if necessary, then insert
the screws leaving about 5mm protruding
from the wall on which to hang the phone.
3. Pull the base out of the stand and slot the
holes on the back of the base over the screw
heads and gently pull the base down to make
sure it is securely in place.
W
all plug
Screw
XXmm
Wall
6cm