Filter
Top Products
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
message, is “Hello, your call cannot be
taken at the moment and you cannot
leave a message, so please call lat
er”.
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
Your Answer Only message can be up
to 11 minutes long (maximum
recording length) and will replace the
pre-recorded message.
However, you should try to keep your
message short to allow time for
recording memos, or incoming
messages when using Answer and
Record mode.
Deleting a personal outgoing message
automatically reinstates the pre-
recorded outgoing message.
You cannot delete a pre-recorded
message.
4. Scroll or to
Answer & Record
or
Answer Only
and
press
Select
.
5. The display shows
Please speak after the tone
.
6. After the tone, speak your message clearly into the handset
then press
Save
to end recording.
7. Your outgoing message is played back. If you want to delete it,
press
Delete
during playback. If you press
Save
or wait for
the message to play back, it will be saved.
Check or delete your outgoing message
1. Press
Menu
, scroll to
Answering Machine
and
press
Select
.
2. Scroll to
Outgoing Message
and press
Select
.
3. Scroll to
Play
and press
Select
.
4. Scroll or to
Answer & Record
or
Answer Only
and
press
Select
.
5. Press to
Personal OGM
and press
Select
.
6. The message is played. Press
OK
to stop playback or press
Delete
to delete a personal OGM.
7. Press
Back
to return to the previous menu level.
Answering machine 53
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com