Filter
Top Products
Dialling mode
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scroll to
Set Base
and press
Select
.
3. Scroll to
Dialling Mode
and press
Select
.
4. Press or to highlight
Pulse
or
Tone
then press
Select
to confirm.
5. Press
Back
to return to the previous menu level or close the
handset cover to return to standby.
Ring priority
1. Press
Menu
, scroll to
Settings
and press
Select
.
2. Scrol l to
Set Base
and press
Select
.
3. Scroll to
Ring Priority
and press
Select
.
4. Press or to highlight
All Handsets
or
Select Handset
then press
Select
.
If you choose
Select Handset
all available handsets are
displayed. Scroll or to highlight the handset you want
then press
Select
.
Scroll or to the number of rings you want to set 2, 4 or
6 and press
Select
.
5. Press
Back
to return to the previous menu level or close the
handset cover to return to standby.
33Base settings
Your BT Aqua is pre-set to Tone
dialling. You should not normally need
to change this setting. The dial mode
options are Tone (Time Break/Earth) or
Pulse (Earth).
BT Aqua – Edition 3 - 24.04.07 – 8131
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
When you have more than one
handset registered to your base, you
can set one handset to ring before the
other handsets. This allows one
handset user to answer all incoming
fir
st, like a receptionist.
Choose
All Handsets if you want all
handsets to ring at the same time or
Select Handset to nominate a
handset t
o ring two times before the
others.