Filter
Top Products
Introducing Your 4610SW IP Telephone
16 4610SW IP Telephone Release 2.2 User Guide
11 Headset With a headset connected, changes audio control from the
handset or Speaker to the Headset.
12 Mute LED
Indicator
Lights steadily when the handset, headset, or Speaker is muted.
13 Mute Turns off the active Speaker, Handset, or Headset microphone,
to prevent the other person from hearing you.
14 Volume
Control
Adjusts the Handset, Speaker, Headset, or Ringer volume,
depending on which item is in use. When you increase or
decrease the volume, the top display area shows an icon to
indicate the item for which you are adjusting the volume. A
visual “volume meter” that shows the volume level follows the
icon. This button also controls the volume of the key click
sounds. Key clicks sound when you press fixed buttons on the
phone such as the dialpad or softkeys.
15 Headset Jack Provides a port for connecting a headset on the underside of the
phone.
16 Hold Red button used to place a call on hold.
17 Transfer Transfers a call to another phone.
18 Conference Sets up conference calls with more than one other person.
19 Drop Drops the last person added to a Conference call or ends the
current call, if you are not on a Conference call.
20 Redial Redials the last number dialed from the phone or displays a list
of the last three numbers dialed for selection. Set using the
Options button described in Chapter 6: 4610SW IP Telephone
Options.
21 Numeric
(Dialing) Pad
Standard 12 button pad for dialing phone numbers.
Table 1: 4610SW IP Telephone Button/Feature Descriptions (continued)
Callout
Number
Button/
Feature Name
Button/Feature
Description
2 of 2