AT&T EP5995 Cordless Telephone User Manual


 
28
Telephone Operation
Intercom calls
Intercom calls
The intercom feature allows conversation
between the handset and the telephone base, or
between handsets if additional handsets are regis-
tered for use with the system.
From the idle mode, press INTERCOM on the tele-
phone base to initiate an intercom call.
From the idle mode, press the CENTER NavKey
to enter the main menu. Press the DOWN NavKey
three times to reach the Intercom menu. Press
the CENTER NavKey to confirm selection.
Press the UP or DOWN NavKey or to scroll
down to select Global page to page all handsets,
or select BASE or one of the registered handsets.
Press the CENTER NavKey (or SELECT at the
telephone base) to page the selected handsets or
the telephone base.
On the selected handset or the telephone base,
press /PHONE/FLASH, /SPEAKER or INTERCOM
to answer an intercom page. The telephone base
will ring until /SPEAKER is pressed or until the
page is cancelled by pressing CANCEL.
When your intercom call is finished, press
/OFF/CANCEL on the handset (or /SPEAKER or
INTERCOM at the telephone base) to end the call.
Handling incoming calls
During an intercom conversation, the telephone
will beep if there is an incoming external call.
On the handset, press
/OFF/CANCEL to termi-
nate the intercom call. The handset will ring
normally. Press /PHONE/FLASH, or /SPEAKER
to answer the incoming call.
At the telephone base, press /SPEAKER or
INTERCOM to terminate the intercom call. The
telephone base will ring normally. Press /
SPEAKER again to answer the incoming call.
x 3
FLASH
CANCEL
Press INTERCOM on the
telephone base.
Intercom
OR