AT&T EP5995 Cordless Telephone User Manual


 
9
Getting Started
Wall mounting
The telephone base can be installed on any standard telephone outlet as
shown below. Choose a central location within the home, away from any elec-
tronic equipment such as personal computers, computer routers, television
sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
1) Connect telephone line cord and AC
power cord to telephone jacks and wall
jacks, as shown on page 7.
2) Install wall mount bracket onto set.
(a) First put the two front wall-mount
bracket tabs into the front notches
on the bottom of the telephone base.
(b) Squeeze the rear tabs of the wall
mount bracket when inserting them into
the rear notches on the bottom of the
telephone base.
Plug the power adapter
into an electrical outlet not
controlled by a switch.
Plug telephone line
cord into telephone
wall jack.
3) Position the wall-
mount bracket over the
wall outlet mounting
pegs, then press and
slide the wall-mount
bracket down firmly so it
is held securely on the
outlet mounting pegs.
b
b
a
a