AT&T 1030 IP Phone User Manual


 
Feature Programming Chart
Use the chart below as a quick reference when you want to program features onto your voice terminal.
54
Feature Name
(Suggested Button Label)
Programming Code
Notes
QUICK DIALING FEATURES
Outside Auto Dial
Dial * 90 + an outside number, an account
See page 20.
(name or location)
number, or a PBX, Centrex, or Custom Calling
feature code.
Auto Intercom
Dial * 91 + a MERLIN system intercom
A button with lights is recommended but not re-
(name or location)
number.
quired. See page 22.
Personal Speed Dial
Dial a Personal Speed Dial code (#01 through
This feature does not use a button. For 5- and
(does not use a button)
#22) + * 90 + an outside telephone number,
10-button voice terminals only. See page 24.
an account number, or a PBX, Centrex, or
Custom Calling feature code.
System Speed Dial
Dial * 95 + a System Speed Dial code (60
See page 25.
(name or location)
through 99).
Saved Number Redial
Dial * 74. If you have a 5- or 10-button voice terminal, you
(Saved Number)
can dial a code to use this feature. See page 26.
Last Number Redial
Dial * 73. If you have a 5- or 10-button voice terminal, you
(Last Number)
can dial a code to use this feature. See page 27.
Manual Signaling
Dial * 6 + the intercom number for the person See page 28.
(Signal “name”)
you want to signal.