AT&T 1030 IP Phone User Manual


 
CALL PICKUP
Use the Call Pickup feature to answer a call that is ringing,
parked, or on hold at another
MERLIN
system voice terminal.
You can use the instructions below to program a button for Call
Pickup, or, if you want to save a feature button for another use,
you can use a dial code to pick up a call.
To program:
T/P to P
Touch a button
Dial * 85
T/P to center
Intercom
Ring
+ +
+
To pick up a call using a Call Pickup button:
Touch
Intercom-Ring
or
Intercom-Voice.
Lift your handset.
Touch
Call Pickup.
Dial the intercom number of the voice terminal holding the
Call Pickup
call.
Using a Dial Code
To pick up a call using a dial code:
Touch
Intercom-Ring
or
Intercom-Voice.
Lift your handset.
Dial * 7.
Dial the intercom number of the voice terminal holding the
call.
intercom
number
Intercom
Ring
+ +
+
* 7
intercom
number
41