AT&T 1030 IP Phone User Manual


 
Pause.
To program a pause (1.5 seconds) into a dialing se-
quence (for example, between a pool access code and an out-
side telephone number):
Touch
Hold
(Pause).
Hold
Pause
Stop.
To program a stop into a dialing sequence (for example,
to program a stop between an alternate long distance telephone
number and your access code):
Touch
Drop
(Stop).
Drop
Stop
To resume the dialing sequence after the stop, touch the Auto
Dial button or dial the Speed Dial code again.
Touch-Tone Enable.
To program Touch-Tone Enable into a dial-
ing sequence (for example, to use a credit card authorization
service):
Touch
Transfer.
Switchhook Flash.
To program a switchhook flash into a dial-
ing sequence (for example, if you program a button with a PBX,
Centrex, or Custom Calling feature code):
Touch
Recall.
Touch
Hold
(Pause).
Transfer
Recall
+
Hold
Pause
21