Filter
Top Products
Coverage Inhibit
With a Coverage Inhibit button, you can temporarily turnoff the
Call Coverage feature so your calls don’t ring at another voice
terminal. Program this feature on a button with lights.
To program:
●
T/P to P
●
Touch the button
●
Dial * 77
●
T/P to center
●
●
●
●
To stop Call Coverage:
Touch
Coverage Inhibit.
The green light next to the button goes on.
Coverage
Inhibit
To restore Call Coverage:
Touch
Coverage Inhibit
again.
The green light next to the button goes off.
Coverage
Inhibit
Using Call Coverage and Coverage Inhibit to Forward Calls
You can set up a call forwarding feature using Call Coverage
and Coverage Inhibit. If you are often away from your voice ter-
minal, but near another voice terminal connected to your
MERLIN
system:
Program a Cover button on the other voice terminal to cover
your calls.
Calls to you ring at the other voice terminal as well as at your own.
When you want calls to ring only at your voice terminal:
Touch
Coverage Inhibit.
Coverage
Inhibit
35