Filter
Top Products
9.1 CS 5 BU
9.1.1 General
Section 9: Specifications
- 43 -CS 5 User Manual
Minimum Nominal Maximum Unit
DC 48V / 3A IN
Input voltage 46 48 50 VDC
Power requirement 3 - 4 W
LINE IN (balanced)
Input level - 0 +6 dBu
Impedance - 20 - kohms
TELEPHONE IN (balanced)
Input level - 0 +6 dBu
Impedance - 20 - kohms
EFFECT IN (balanced)
Input level - 0 +6 dBu
Impedance - 20 - kohms
TAPE IN (unbalanced, stereo*)
Input level - -10 -4 dBu
Impedance - 20 - kohms
EXT. LANG IN (balanced)
Input level - 0 +6 dBu
Impedance - 20 - kohms
EXT. MIC. IN
Input level - -40 -34 dBu
Impedance - 20 - kohms
Phantom power - 48 - V
Output Levels
LINE OUT (balanced) - 0 +6 dBu
TELEPHONE OUT (balanced) - 0 +6 dBu
EFFECT OUT (balanced) - 0 +6 dBu
TAPE OUT (unbal., stereo*) - -10 -4 dBu
Output Load Impedance - 1 - kohm
Output Frequency Range
(-3dB)
20 - 20k Hz
Headphone Output
Power - 90 200 mW
Load impedance 8 32 - ohms
Frequency range (-3dB) 45 - 22k Hz
Physical Dimensions
Height 1/1.75/44 U/in./mm
Width 18/482 in./mm
Depth inc. connector protrsion 4.25/108 in./mm
Weight 3.2/1450 lbs./g
* Use TRS plugs only. Connecting a TS plug would short the ring contact to ground and damage the device.