Filter
Top Products
Section 5: CS5 VU Voting/Chairperson Station
5.3.4 PRESIDENT Mode
If you have set dip switch S8 for PRESIDENT mode, the President main menu will appear on the display upon power-
ing up.
Fig. 7: President menu and selectable submenus.
1. Press soft button 1 to select the volume control for the left and right-hand headphone outputs. Press soft buttons
1 and 2 to decrease (-) or increase (+) the volume for the left-hand headphones, buttons 4 and 5 to decrease (-)
or increase (+) the volume for the right-hand headphones. Two bargraphs indicate the current settings.
Press soft button 3 (BACK) to return to the main menu.
2. Press soft button 2 to call up the language selection submenu for the left and right-hand headphone outputs.
Press soft buttons 1 and 2 to select the desired language for the left-hand headphones, buttons 4 and 5 to select
the desired language for the right-hand headphones. Channel 0 carries the floor signal, channels 1-63 are assigned
to the interpreted languages listed in Table 4 in section 6.3.5 on page 32.
Press soft button 3 (BACK) to return to the main menu.
3. Press soft button 4 to select the loudspeaker volume control.
Press soft buttons 2 and 4 to decrease (-) or increase (+) the volume. A bargraph indicates the current setting.
Press soft button 3 (BACK) to return to the main menu.
4. Press soft button 3 to set the microphone station to priority mode. In priority mode, pressing the talk button once
always activates the microphone and mutes the microphones on all microphone stations where priority muting has
been enabled.
To quit priority mode and return to the main menu, press soft button 4 (CLEAR).
5. Press soft button 5 to initiate a ballot or opinion poll. Refer to section 5.4 below.
6. To return to the main menu, press soft button 3 (BACK).
CS 5 User Manual
- 26 -