Filter
Top Products
Chapter 3. Using the Express Configuration Program
3-16 Express 3000 User Manual 61203153L2-20
TXADD01
Specifies the length of time (in seconds) both units wait for an ad-
ditional call to connect at the end of negotiation before determin-
ing Async BONDING has failed.
TXDEQ
Specifies the length of time (in seconds) both units attempt to
equalize a network delay between ISDN B channels before deter-
mining Async BONDING has failed.
TANULL
Specifies the length of time (in seconds) the answering unit at-
tempts to detect Async BONDING negotiation from the originat-
ing unit before determining Async BONDING has failed.
TCID
Specifies the length of time (in seconds) both units attempt to ne-
gotiate an agreeable value for B channels and channel capacities
before determining Async BONDING has failed.
Phone List Tab
Stores phone numbers used for various call accept or reject criteria.
Allow only stored numbers
Instructs the Express 3000 to accept only incoming calls originat-
ing from telephone numbers programmed in Stored Numbers 0
through 9.
Stored Numbers
Accepts and saves ten numbers used for dialing or call screening.
Enable Call Rejection List
Instructs the Express 3000 to compare all incoming Speech and
Audio calling party numbers to the list of ten numbers in the In-
coming Voice Call Rejection List. If a match between the incoming
calling party number and an entry in the Incoming Voice Call Re-
jection List occurs, the Express 3000 refuses to ring the POTS port.
Generally, the caller experiences a busy signal. A message in the
Status Buffer is the only indication that a call has been rejected.