Filter
Top Products
Chapter 3. Using the Express Configuration Program
61203153L2-20 Express 3000 User Manual 3-25
Diagnosing Connection Problems
You can diagnose many connection problems by viewing the Status
Buffer messages returned from the ISDN network and the ADTRAN
Express 3000. Access these messages by clicking the
Status Buffer
but-
ton (under
diagnostics
).
Launching Terminal Programs
Launch the terminal program specified in the
preferences
option
(
Program Name
) by clicking the
Terminal
button (under
diagnostics
).
Diagnosing Remote Units
With the
diagnostics
option, you can collect information about re-
mote units. Enter the phone number of the remote unit and a pass-
word, if required. Then click on the appropriate button to access the
information you want. Buttons include
Test
,
Register Dump
,
Config
,
and
Status Buffer
.
Testing a Remote Unit
Follow the steps below to begin testing a remote unit.
Configuring a User Profile on a Remote Unit
To configure a User profile on a remote unit, click the
Config
button
(under
diagnostics
). (See also
Using Profiles
on page 3-7.)
Retrieving Current Settings from a Remote Unit
To retrieve the current settings from a remote unit, click the
Register
Dump
button (under
diagnostics
). The current settings display in a
format identical to the Preview list (see
Preview Tab
on page 3-11 or
page 3-18).
Instructions for Testing a Remote Unit
Step Action
1
Click the
Test
button (under
diagnostics
).
2
Choose the number of B channels with which to test.
3
Click
Start
to begin the remote test.