Filter
Top Products
Appendix B. Status Buffer Messages
61203153L2-20 Express 3000 User Manual B-5
available. Ensure flow control setting match on both terminal
adapters.
Disconnect Req
Far-end unit disconnected during BONDING negotiation.
DTR not up
Express 3000 tried to place a call in a dialing mode that re-
quires DTR to be in an active state, but it is not.
Dump call
The Express 3000 could not accept an incoming call because it
was already involved in a call.
Dump
An incoming call on either the first or second channel was dis-
carded by the Express 3000. The calling number is displayed
if available.
ED_MISMATCH
Call is connected to different end point device. Call ISP.
FACILITY_NOT_IMPLEMENT
The network does not support the requested supplementary
service.
FACILITY_NOT_SUBSCRIBED
The channel type requested has not been subscribed.
FACILITY_REJECTED
A facility requested by the user cannot be provided by the net-
work.
Factory Reset 0
Unit defaulted to factory configuration.
FlowCtl mismatch
Bonding negotiation determined a flow control mismatch.