Filter
Top Products
76 CHAPTER 5: STANDARD FEATURES
Hunt Group calls routed to a call coverage point always go to the point
configured for the Hunt Group, not to the point configured for (or by) the
Hunt Group member (that is, the member’s personal call coverage point).
If the member has Do Not Disturb enabled, personal (non-Hunt Group)
calls go to the call coverage point. However, Hunt Group calls always ring
on a member’s phone, regardless of the Do Not Disturb setting.
If your telephone is part of a bridged extension, see Hunt Groups and
Bridged Line Calls for additional information.
Logging In to a Hunt
Group
When your administrator gives you your hunt group membership
information, you can log in to your hunt group (or groups if you have
been assigned membership in multiple groups). You must be logged in to
a hunt group to receive calls for that group.
You must be logged in to your VCX system account before you can log in
to a hunt group. If you are not logged in to the VCX system, which
requires password authentication, you cannot log in to a hunt group. See
the overview section for your phone in this guide.
To log in to a hunt group:
1 Select Features.
2 Scroll to Hunt Group Login Enabled.
3 Press Select.
4 Enter the group number.
5 Enter the group password and press #.
To log out of a hunt group, repeat the steps used to log in.
All members available Route call to first member
in the list.
Route call to the member
following the member to
whom the last call was
routed.
Ring all member phones.
Total timeout reached Go to call coverage. Go to call coverage. Go to call coverage.
Table 5 Hunt Group Behavior (continued)
Condition
Linear Hunt Group
Result
Circular Hunt Group
Result
Calling Group
Result