Filter
Top Products
62 CHAPTER 5: STANDARD FEATURES
1001
Use the up and down scroll buttons to locate the speed dial number
you want to dial.
2 Press the Dial soft button under the Display Panel.
Your phone dials the number.
To exit the speed dial list in the Display Panel, press the Exit soft button.
In addition to using the Feature menu to list speed dial numbers, you can
view the speed dial numbers configured on your phone by pressing
Feature + 463.
Dialing System Speed
Dial Numbers
The administrator can set up system-wide speed dials for numbers that
are dialed frequently by many internal users. You can view the
system-wide speed dial list through the VCX User Interface (see
Chapter 6 for information) or you can view and dial numbers from it
using the telephone display panel.
To use a system speed dial number:
1 Pick up the handset or press the Speaker button.
2 Press the Feature button plus 700 plus the system-wide speed dial
number for the number that you want to call. Alternatively, you can press
the Feature soft button, scroll to Speed Dials: System, press Select,
scroll to the number that you want to dial, and press Select again.
If you dial a speed dial code that has no number assigned to it, the display
panel on your telephone shows the message “No number stored.”
Call Forwarding This section describes how to enable and use call forwarding features set
up through the Telephone User Interface (TUI). You can also configure
and enable call forwarding through the VCX User Interface. See
Enabling
Call Forwarding.
You can use the TUI on your phone to specify:
■ Where you want your call to be forwarded
■ The condition that results in the system forwarding a call:
■ No Answer — Redirects incoming calls to another destination
when your phone rings for a configured time period (the default is
20 seconds). You can forward all unanswered calls by enabling Call