Filter
Top Products
58 CHAPTER 5: STANDARD FEATURES
To disable this feature, repeat steps 1 through 3.
Transferring a Call
to Another User’s
Voice Mail
You can transfer a connected call directly to another subscriber’s voice
mail rather than that subscriber’s phone extension. The subscriber can be
located locally or at a remote site.
To transfer a call to another subscriber’s voice mail:
1 Press the Features soft button + 441.
The Display Panel shows the following prompt:
Transfer VMail Number:
2 Enter the extension of the subscriber whose mailbox will receive the call.
The caller hears the mailbox greeting of the target subscriber but the
subscriber’s phone does not ring.
Call Waiting The Call Waiting feature provides a “beep” on your current call to let you
know that another call has arrived on another access line.
1 When you hear the “beep”, press the Hold button to put the current call
on hold.
2 Press the Access button for the incoming call.
3 To toggle between the two calls, put the current call on hold and then
press the Access button for the call you want.
Speed Dialing This section describes the following types of speed dialing:
■ One-Touch Speed Dials — With this type of speed dialing, a
telephone number (internal or external) is mapped to a dedicated
Access button on your phone. Pressing the button dials the call.
■ Personal Speed Dials — With this type of speed dialing, you map a
number (internal or external) to a feature code value. To use a
personal speed dial, you press the Feature button and enter the
appropriate feature code.
Feature code 601 plus 1 through 9 inclusive, are available, which
allows you to create up to 9 personal speed dials. Personal speed dials
allow speed dialing on phones that do not have Access buttons.
Personal speed dials are available on all VCX telephone models.