VTech VT 2960 Cordless Telephone User Manual


 
4
IMPORTANT SAFETY INSTRUCTIONS
VII.This product should be operated
only from the type of power source
indicated on the marking label. If
you are not sure of the type of
power supply to your home,
consult your dealer or local power
company.
VIII.Do not allow anything to rest on
the power cord. Do not locate this
product where the cord will be
abused by persons walking on it.
IX. Never push objects of any kind
into this product through cabinet
slots as they may touch dangerous
voltage points or short out parts
that could result in a risk of fire or
electric shock. Never spill liquid
of any kind on the product.
X. To reduce the risk of electric
shock, do not disassemble this
product. If service or repair work
is required, contact VTech
Customer Service at 1-800-595-
9511in the U.S. or 1-800-267-7377
in Canada. Opening or removing
cabinet parts other than specified
access doors may expose you to
dangerous voltages or other risks.
Incorrect reassembling can cause
electric shock when the appliance
is subsequently used.
XI. Do not overload wall outlets and
extension cords as this can result
in the risk of fire or electric shock.
Important Safety Instructions
When using your telephone, please
follow these basic safety precautions
to reduce the risk of fire, electric shock
or injury to persons:
I. Read and understand all
instructions.
II. Follow all warnings and
instructions marked on the
product.
III. Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol
cleaners. Use a damp cloth for
cleaning.
IV. Do not use this product near water
(for example, near a bath tub,
kitchen sink, or swimming pool).
V. Do not place this product on an
unstable cart, stand, or table. The
product may fall, causing serious
damage to the product.
VI. Slots and openings in the cabinet
and the back or bottom are
provided for ventilation. To protect
it from overheating, these
openings must not be blocked by
placing the product on a bed, sofa,
rug, or other similar surface. This
product should never be placed
near or over a radiator or heat
register. This product should not
be placed in a built-in installation
where proper ventilation is not
provided.