VTech VT 2960 Cordless Telephone User Manual


 
35
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
AFTER "NOW RECORDING,"
BEGIN SPEAKING
PRESS STOP/PLAY WHEN
FINISHED.
PRESS RECORD/MEMO .
MEMO RECORDING
THE VT2960 ANSWERING SYSTEM
MEMO RECORDING
To record a memo, do the following:
1. Press RECORD/MEMO. Voice
prompt says, "Now Recording,"
followed by a beep. Speak toward
the front of the Base Unit.
2. Press STOP/PLAY when finished.
Voice prompt says, "End of
Recording," followed by a beep.
The message counter stores a memo
as a new message.
You will then hear a confirmation
beep, followed by an announcement
of how many messages are in
memory for that line. Afterwards,
automatic playback of messages will
begin.
The following is a menu of remote
commands and functions:
BASIC FUNCTIONS
Press #2 to play all messages
Press #5 to STOP (playback or
recording)
Press #4 to repeat the message
Press #6 to skip to the next
message
Press #9 (during playback) to
erase the message
Press #3 (then # and the
appropriate security
code) to access the
other line
Press #1 for advanced functions
ADVANCED FUNCTIONS
Press #7 to review your outgoing
message
Press *7 to record your outgoing
message
Press *8 to record a memo
Press #4 twice to repeat
previous message
Press #0 to turn the system on or
off
Press #1 for basic functions
Press *0 to exit remote control
mode
REMOTE OPERATION OF YOUR
VT2960 ANSWERING SYSTEM
From a remote location, you can
access many of the answering system
features, such as listening to
messages and changing your outgoing
message.
Touch Tone service is required to
access your VT2960 remotely.
To access your VT2960 answering
system from a remote location, dial one
of the telephone numbers to which the
system is connected. Once you hear
the outgoing message begin:
Press #, then the appropriate 2-digit
security code.