Filter
Top Products
33
THE VT2960 ANSWERING SYSTEM
SELECT button down will increase
the minute setting by increments of
10.
7. Press TIME/SET. Voice prompt will
announce the current day and time.
8. Press STOP/PLAY to exit
programming mode.
AUDIBLE MESSAGE ALERT
This feature provides a beep tone from
the Base Unit at approximately 10
second intervals, alerting you to new,
unplayed messages. To program
Audible Message Alert:
1. Press MENU three times. Voice
prompt says, "Set Audible
Message Alert."
2. Press SELECT to choose "ON" or
"OFF".
3. Press TIME/SET to confirm your
selection. ("Audible Message
Alert is ____")
4. Press MENU to advance to the next
programming function, or press
STOP/PLAY to exit programming
mode .
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
PRESS SELECT TO CHOOSE
THE CORRECT DAY.
PRESS TIME/SET TO CONFIRM.
PRESS STOP/PLAY TO EXIT
PROGRAMMING.
PRESS MENU FOUR TIMES
FOR "SET DAY AND TIME".
SETTING THE DAY AND TIME
PRESS SELECT TO CHOOSE
THE CORRECT HOUR.
PRESS SELECT TO CHOOSE
THE CORRECT MINUTE.
PRESS TIME/SET TO CONFIRM.
PRESS TIME/SET TO CONFIRM.
SETTING THE DAY AND TIME
1. Press MENU four times until voice
prompt says, "Set Day and Time."
2. Press SELECT to choose the
correct day.
3. Press TIME/SET. Voice prompt will
announce an hour setting.
4. Press SELECT until you reach the
correct hour.
5. Press TIME/SET. Voice prompt will
announce a minute setting.
6. Press SELECT until you reach the
correct minute. Holding the
BASIC ANSWERING SYSTEM
OPERATION
TURNING THE ANSWERING
SYSTEM ON AND OFF
As you press the ON/OFF button
repeatedly, the voice prompt goes
through the following sequence, and
the corresponding L1 ANSWER and
L2 ANSWER indicators will illuminate:
"Answering Machine ON for Both
Lines"
"Answering Machine ON for Line 1,
OFF for Line 2"
"Answering Machine OFF for Line
1, ON for Line 2"
"Answering Machine OFF for Both
Lines"
NOTE:If L1 Answer and/or L2
Answer indicators are flashing, it is to
remind you that the system is in the
Announce-Only mode for that
particular line(s).
A
T
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
A
T
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
PRESS SELECT TO CHOOSE
ON OR OFF.
PRESS TIME/SET TO CONFIRM
SELECTION.
PRESS MENU THREE TIMES
FOR "SET AUDIBLE MESSAGE
ALERT"
AUDIBLE MESSAGE ALERT