Filter
Top Products
28
3. Press INT.COM/DELETE to confirm
deletion of all CID records. The LCD
will display
DELETING ALL CALLS
.
Pressing any key other than
INT.COM/DELETE cancel this op-
eration.
DIALING FROM CID MEMORY
NOTE: Only the last 7 digits of the
phone number will be dialed from CID
memory. You can manually append
additional digits (“1” plus area code,
for example) to the number prior to
dialing.
1. With the Handset OFF, press CALLER
ID.
2. Use the * ( ) or # ( ) keys to scroll
to the desired CID record.
3. Press the desired LINE key.The
number associated with the CID record
willbe dialed (last 7 digits only).
Adding digits for CID dialing
For example, if the CID record is:
only 643-8981 will be dialed when the
LINE key is pressed. To dial
1(503)643-
8981
, do the following:
1. With the Handset OFF, enter 1503.
2. Press CID.
3. Use the * ( ) or # ( ) key to scroll
to the CID record.
4. Press the desired LINE key. The
number dialed will include the long
distance “1” plus the area code.
CID-CALLER ID
Caller ID data transmission is incomplete.
If this display appears often, contact your
local service provider.
DELETING CID RECORDS
Your
VT 2960
stores the most recent 50
CID records in memory. When CID
memory is completely filled, the oldest
record is automatically deleted as a new
call is stored. Therefore, you do not have
to delete CID records manually. However,
if you want to delete CID records, follow
the steps listed below:
Deleting a single CID record
1. With the Handset OFF, press the CID
key. The most recent call will be dis-
played on the LCD (Call #01).
2. Press the * ( ) or # ( )keys to scroll
to the desired record.
3. Press and hold the INT.COM/DELETE
key until the LCD displays
DELETING SINGLE CALL
.
4. If you have other records to delete,
scroll to the desired record and
repeat the process.
5. Press OFF when done.
Deleting ALL CID records
1. With the Handset OFF, press the CID
key. The most recent call will be dis-
played on the LCD (Call #01).
2. Press and hold the CONF/CLEAR
key until the LCD displays
DELETE
ALL? DEL TO ALLOW
.