Filter
Top Products
17
LINE 2 (EXTENSION IN USE) LED
Glows steadily when the Base Unit is
accessing LINE 2.
Flashes slowly when only the Handset
or an extension phone is accessing
LINE 2.
Flashes rapidly when LINE 2 is placed
on HOLD.
Flashes in cadence with the incoming
ring when you receive a call.
LINE 1 KEY
Press this key to access or FLASH
LINE 1.
During CONFERENCE mode, pressing
this key will maintain access to LINE 1
while placing LINE 2 on HOLD.
LINE 2 KEY
Press this key to access or FLASH
LINE 2.
During CONFERENCE mode, press-
ing this key will maintain access to
LINE 2 while placing LINE 1 on HOLD.
OFF KEY
Press this key to disconnect the Base
Unit during any of the following
conditions:
1. The Base Unit is on LINE 1 or 2
2. The Base Unit is CONFERENCING
LINES 1 and 2
3. The Base is in INTERCOM mode.
NOTE: Pressing this key affects the
Base Unit only. Also, pressing OFF will
not disconnect a call which the Base
Unit has placed on HOLD.
BASE UNIT FEATURES
BASE LED INDICATORS
POWER LED
Glows when the AC adaptor is
supplying power to the Base Unit.
CHARGE LED
Glows when the Handset is placed in
the Base Unit cradle to charge.
SPARE BATTERY LED
Glows when the (optional) battery pack
is installed in spare battery compartment
in the Base Unit.
INTERCOM LED
Glows when the Base Unit has entered
the INTERCOM mode with the Handset.
MUTE LED
Glows when the MUTE key has been
pressed, indicating that the Base Unit
microphone has been temporarily
disabled.
LINE 1 (EXTENSION IN USE) LED
Glows steadily when the Base Unit is
accessing LINE 1.
Flashes slowly when only the Handset
or an extension phone is accessing
LINE 1.
Flashes rapidly when LINE 1 is placed
on HOLD.
Flashes in cadence with the incoming
ring when you receive a call.