Filter
Top Products
32
THE VT2960 ANSWERING SYSTEM
The following programming affects
both lines, simultaneously:
• Call Screening
• Audible Message Alert
• Day and Time
CALL SCREENING
This feature allows you to hear
incoming messages at the Base Unit,
while they are being recorded. To
program Call Screening:
1. Press MENU twice. Voice prompt
says, "Set Call Screening."
2. Press SELECT to choose "ON" or
"OFF"
3. Press TIME/SET to confirm your
selection ("Call Screening is ___")
4. Press MENU to advance to the next
programming function, or press
STOP/PLAY to exit programming
mode.
SETTING THE NUMBER OF RINGS
For each line, the answering system
can answer calls after 2, 4 or 6 rings;
or Toll Saver.
Toll Saver is a feature which, when
selected, will command the answering
system to answer an inbound call after
2 rings only if there are new, unplayed
messages in memory. Otherwise, the
answering system will answer after 4
rings. The purpose of this feature is to
assist you in avoiding long distance
charges when calling your VT2960
from a remote location to retrieve
messages. If the VT2960 does not
answer after 2 rings, you can hang up.
There aren't any new messages. To
set the number of rings:
1. Press MENU. Voice prompt says,
"Please select line."
2. Press SELECT to choose the
desired line.
3. Press TIME/SET to hear
confirmation of your line choice,
followed by "Set outgoing
message."
4. Press MENU three times, until voice
prompt says, "Set number of
rings."
5. Press SELECT to choose between
2, 4, 6 rings, or Toll Saver.
6. Press TIME/SET to confirm your
choice. Voice prompt will say,
"Number of Rings selected is
_________."
Press MENU to advance to the next
programming function, or press STOP/
PLAY to exit programming mode.
A
T
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
A
T
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
PRESS SELECT TO CHOOSE
LINE 1 OR 2.
PRESS TIME/SET TO CONFIRM
LINE.
PRESS MENU .
SETTING THE NUMBER OF
RINGS
PRESS SELECT TO CHOOSE
NUMBER OF RINGS.
PRESS TIME/SET TO CONFIRM
SELECTION.
PRESS MENU THREE TIMES
FOR "SET NUMBER OF RING:
A
T
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
A
T
ANSWER
MSG
STOP/PLAY
SKIP
ANSWER
MSG
MSG
SELECT
ON/OFF
RECORD/
MEMO
VOLUME
HOLD
MUTE
CONF.
LINE 2 OFF
MSG
L1
L2
VT 2960
MENU
SELECT
TIME/SET
PRESS SELECT TO CHOOSE
"ON" OR "OFF".
PRESS TIME/SET TO CONFIRM
SELECTION.
PRESS MENU TWICE FOR
"SET CALL SCREENING".
CALL SCREENING