Filter
Top Products
23
Base Unit Paging Handset
When the INT.COM key is pressed on
the Base Unit, the Handset will ring dif-
ferently than its incoming call ring. The
LCD will display BASE PAGING HAND-
SET, as well. The Handset user can
then do the following:
• Press INT.COM. The Base Unit and
Handset are now in INTERCOM mode.
OR
• Press OFF. The alerting ring will stop.
OR
• Let the ringing continue. It will stop
after 5 rings.
Handset Paging Base Unit
When the INT.COM key is pressed on
the Handset, the Base Unit rings
once
,
and then automatically enters INTER-
COM mode. The person at the Base
Unit does not need to press any keys to
respond to the Handset.
While in INTERCOM mode, either party
can press OFF to terminate this feature.
If a call comes in while your
VT 2960
is
in INTERCOM mode, the Handset and
Base Unit will ring normally. Once the
appropriate LINE key is pressed on ei-
ther component, you will be connected
with the caller, and the INTERCOM
mode is terminated.
BASIC OPERATION