Filter
Top Products
36
ON LEFT EAR
ON RIGHT EAR
ONE
INCH
Your VT2960 cordless telephone is
equipped with a 2.5mm Headset Jack
for use with an optional accessory
Headset or hands-free operation.
If you choose to use the Headset op-
tion, you must do the following:
INSTALLATION
Obtain an optional accessory Headset,
which is compatible with the VT2960.
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Handset of your VT2960. Connect
the plug on the Headset to the jack on
the cordless Handset. The plug should
fit securely. Do not force the connec-
tion. See illustration.
HEADSET INSTALLATION AND OPERATING
INSTRUCTIONS
The headset has a monaural design
which is reversible, so you can wear
your Headset on either the left or right
ear, leaving one ear free for room
conversation.
PLUG THE OPTIONAL
HEADSET INTO THE
JACK
1 LINE 2
LINE 1
OFF
LINE 2
CID
REDIAL
PROG
MEM CONF INT.COM
123
45
6
7
0
*
abc def
ghi jkl
pqrs tuv
wxyz
tone oper
FLASH FLASH
HOLD
PAUSE
DELETE CLEAR
89
mno
The headband can be adjusted to fit
the contour of your head. Using both
hands, slide the headband up or down
so that it rests comfortably on your
head with the speaker cushion
centered against your ear.
For maximum sound quality, the
flexible microphone should be
positioned at the corner or your mouth,
about one inch from your face. For
maximum sound quality, the flexible
microphone should be positioned at
the corner or your mouth, about one
inch from your face.