Filter
Top Products
11
REDIAL KEY
Press this key to display and/or dial the
last number you called.
When the Handset is On (with dial tone),
press this key to dial the last number
called.
When the Handset is Off, pressing this
key will display the last dialed phone
number on the LCD. You can then press
a LINE key, and the displayed number
will be dialed. If you do not wish to dial,
press OFF to exit the REDIAL mode.
HOLD/PAUSE KEY
Press this key when the Handset is on
one or both lines to place the call(s) on
Hold.
Press the appropriate Line key to cancel
Hold. If both lines are on Hold, press
the CONF/CLEAR key to cancel Hold
and return to the Conference Call.
NOTE: Pressing
OFF
or
HOLD/PAUSE
will not cancel Hold.
Press this key to insert a 2 second
pause as you program phone number
into MEMORY DIALING. See
TO
STORE A NUMBER INTO MEMORY.
CONFERENCE/CLEAR (CONF/
CLEAR) KEY
Press this key to CONFERENCE a
call on LINE 1 and a call on LINE 2
simultaneously. To enter
CONFERENCE mode,the Handset
must be in one of the following con-
ditions.
HANDSET FEATURES
1. LINE 1 is on a call and LINE 2 is on
HOLD
2. LINE 2 is on a call and LINE 1 is on
HOLD
3. Both lines are on HOLD.
NOTE: While in CONFERENCE mode,
MEMORY DIALING numbers and CID
records cannot be accessed.
While the Handset is Off, press this key
for more than 1 second to clear the LCD
display. This is helpful if you should
misdial during MEMORY programming.
While in CID or MEMORY DIALING
mode, press this key for more than
1 second to delete the entire contents
of the list you’re examining. The LCD
will prompt you to press the INT.COM/
DELETE key to confirm your decision.
INT.COM/DELETE (
INTERCOM/
DELETE )
KEY
While the Handset is Off or when a line
is on Hold, press this key to enter the
INTERCOM mode with the Base Unit.
Press OFF to exit the INT.COM mode.
While the Handset is Off, press and hold
this key for more than 1 second to
delete the last digit entered, as reflected
by the LCD display. This is comparable
to a Backspace function on a keyboard.
If you continue to hold the INT.COM/
DELETE key, the backspace function
will continue.