Filter
Top Products
18
BASE UNIT FEATURES
CONF KEY
Press this key to conference LINE 1 and
LINE 2.
HOLD KEY
Press this key to place your call on
HOLD.
Press the appropriate LINE key to can-
cel HOLD.
In CONFERENCE mode, press this key
to place both lines on HOLD. Press
CONF to cancel HOLD.
MUTE KEY
Press this key to disable the Base Unit
microphone during a call (or during
INT.COM mode). Press this key again
to cancel MUTE.
INTERCOM (INT. COM) KEY
Press this key to page the Handset. If the
Handset user responds by pressing INT.
COM, the INTERCOM LED on the Base
Unit will glow and the 2 parties can now
talk. The Handset user can also choose
to terminate the page by pressing OFF.
Press OFF to exit from the INTERCOM
mode.
This feature can be used as a Handset
locator. The Handset will ring a maxi-
mum of 5 times, giving you an opportu-
nity to find it.
VOLUME UP & DOWN KEYS
Press these keys to raise and lower the
Speakerphone volume level. You can
hold a key down to achieve maximum
(or minimum) volume.
RINGER
ON/OFF
SWITCHES
Located on the right edge of the Base
Unit (antenna side), these switches con-
trol the Base Unit ringer for each line.
These switches have no effect on the
Handset ringers.
TONE/PULSE SWITCH
Located on the underside of the Base
Unit, set this switch to the dialing mode
compatible with your local telephone
service. For most areas, TONE is the
preferred dialing mode.