2
Getting started
Important notes
Auto keylock: To prevent accidental key presses, the
handset keys automatically lock after 10 seconds without
presses. Press the UNLOCK softkey to unlock the keypad
(see page 23).
Dialing 911: You must unlock the keypad before you can
dial 911 or any other number on the handset.
When the handset is idle, the backlight is off. You must rst touch the touch
panel in order to take the handset or telephone base out of idle mode before
using it with the exception of the UNLOCK softkey. This rst touch is not an
operational keystroke.
Installation
Install the telephone base close to a telephone jack and a power outlet not
connected to a wall switch. For optimum range and better reception, place
the telephone base in a central and open location.
This product may be shipped with a protective sticker covering the handset
and/or telephone base display. Remove it before use.
Avoid placing the telephone base too close to:
Communication devices such as: personal computers, computer routers,
television sets, VCRs, wireless routers (wireless broadband, Wi-Fi, or
802.11) or other cordless telephones.
Excessive heat sources.
Noise sources such as a window with trafc outside, motors, microwave
ovens, refrigerators, or uorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing machine or
work bench.
Cleaning tips for your touch screen telephone
Use the cleaning cloth provided to clean your telephone. Clean your
telephone only with a dry non-abrasive cloth. Using a dampened cloth or
cleaning solvents of any kind may activate the keys on the telephone.
If you unplug the telephone before cleaning, remember to reset the clock
when done.
•
•
•
•
•
•
•
HANDSET X
On
Press UNLOCK
to use keys
UNLOCK